Technical Specifications
1. RECEIVER
- Circuit Type: Direct Digital Sampling
- 16 bits ADC
- ADC sampling rate 122,88 Msps
- General coverage receiver covers from 10kHz to 55 MHz
- Minimum step size 1Hz
- Waterfall span: 48/96/192 kHz
- Dynamic Range Figures: Blocking: 125 db
- Ultimate receiver bandwidth set by band filters for 160m-6m (combination of HPF and LPF)
- Switchable attenuator, 0 - 60 dB with 1 or 10 dB step
- Linear output level 100mV - 10kohm
2. TRANSMITTER
- Circuit Type: Direct Digital Upconversion
- 14 bits DAC
- DAC sampling Rate 122,88 Msps
- OUTPUT POWER: 1 - 100 Watts USB, LSB; 1 - 30 Watts AM, FM, CW, RTTY;
- 7th order LPF
3. GENERAL
- Operating modes LSB, USB, CW, RTTY, Digi, AM, FM.
- Internal CPU speed 122,88 MHz
- Phase noise -135dBc@1kHz 122,88MHz (Crystek CVHD-950)
- Freq stability 1ppm
- Antenna input x3 BNC
- ANTENNA IMPEDANCE: 50 ohms unbalanced
- Connector for external converter XV Rx; XV Tx - BNC x2
- Ethernet connection 100/1000 Mbps
- SUPPLY VOLTAGE: +13.8 Volts +/- 15% Regulated DC at approximately 23 Amps at full output power, 0.7 Amps in Rx
- DIMENSIONS: 150 mm W x 320 mm D x 85 mm H
- WEIGHT: Approximately 5.6 kg
Main features:
- Independent Rx channel (DDC)
- Independent Tx channel (DUC)
- Two independent receivers (depending on used software)
- 3 antenna connectors with a programmable automatic antenna selector
- Embedded power and SWR meter
- Tx control output for external PA
- CW keyer input
- Headphones output 16 - 300 Ohms
- Electric or dynamic mic input
- GPIO port with 7 high power output lines
- Galvanically isolated LAN interface
- Easy configurable for remote control
System requirements:
- CPU 1.6 GHz or more
- min 2GB RAM
- OS: Windows XP, Windows 7, Windows 8
- Ethernet adapter 100/1000 BASE-T
- Video card: 1024x768, 256 MB or more RAM
No comments:
Post a Comment